MARK LEVINSON NO320S
Manual de Usuario

Nº 320S Preamplifier Phono Modules To adjust the Bal parameter:
PHONO (7)

Installation Instructions & Release Notes

1. Rotate the front panel select knob or press the remote control select ± buttons to select the phono input. � The front panel display indicates the name and volume level of the selected input.

Name= PHONO

2. Press and hold the front panel or remote control setup button until the Name parameter appears on the front panel display. � The front panel setup LED lights red to indicate that the setup menu is open.

Bal= <-0.0->

3. Rotate the select knob or press the select ± buttons until the Bal parameter appears on the front panel display as shown to the left.

4. Press the front panel or remote control enter button to select the Bal parameter. � The equal sign between the parameter name and the parameter setting will blink to indicate that the Bal parameter is selected. 19 5. Rotate the front panel volume knob or press the remote control volume ± buttons to make the desired adjustments.
Bal= 6.0--->

�

Rotate the volume knob clockwise or press the volume + button to decrease the input level of the left channel. The Bal parameter appears as shown to the left to indicate that balance is offset in favor of the right channel. Rotate the volume knob counterclockwise or press the volume � button to decrease the input level of the right channel. The Bal parameter appears as shown to the left to indicate that balance is offset in favor of the left channel. Select the 0.0 setting to balance the input levels of the left and right channels. The Bal parameter appears as shown to the left to indicate that balance is centered between the left and right channels.

Bal= <---6.0

�

Bal= <-0.0->

�

6. When the desired setting appears on the front panel display, press the enter button to select this setting. 7. Press and release the setup button to close the setup menu. � The front panel setup LED is not lit when the setup menu is closed.